PRODUCTS

Styrokote 1090 - Liquid Membrane with Thermal Insulation

Styrokote 1090 - Liquid Membrane with Thermal Insulation

Styrokote is a modified bitumen-based, single-component waterproofing liquid membrane, providing also thermal insulation. It is water-based and ready-to-use. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

Description

Styrokote is a modified bitumen-based, single-component waterproofing liquid membrane, providing also thermal insulation. It is water-based and ready-to-use. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

 
Usage Areas

• It is used on all horizontal and vertical surfaces.

• It is used for insulating the walls of foundations, underground

storehouses, and basements from outside.

• It is used for insulating water leakage in closed damp environments such as bathrooms, kitchens, and toilets, etc.

• For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with insulation netting.

•  It can be used for adhering thermal insulation boards.

Application

    •  Styrokote is a cold applied, prepared material.

    •  As a prepared material it does not require thinning.

•  After having mixed,  it should be applied with a  trowel.

•  Each coat must beapplied only after the preceding oneis completelydry.

•  Depending on weather conditions, it dries in approximately 4-5 hours.

•  It should not be applied in rainy weather, or at temperatures below +5°C.

Advantages

    •  If the application is thick enough, it also provides thermal insulation.

•  It  can cover cracks up to 7 mm. It can be also used on unplastered brick walls.

•  It provides a seamless insulation layer.

•  Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.

•  Because it contains water, it enables good adhesion even when the surface is moist.

    •  It is elastic.

    •  It is ready to use.

    •  As a cold applied material, it does not require heating, or thinning.

 
 
 
 
Consumption
2-4 kg/
 
Packaging

10 kg Pail