PRODUCTS

Emülzer C Kauçuklu 1002 -Bituminous Solution with Rubber Additive

Emülzer C Kauçuklu 1002 -Bituminous Solution with Rubber Additive

Emulzer C is a ready-to-use waterproofing bituminous solution with a rubber additive. It does not contain any filling material. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

Description

Emulzer C is a ready-to-use waterproofing bituminous solution with a rubber additive. It does not contain any filling material. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

 
Usage Areas

•  Emulzer C is used against ground humidity and leakage in foundations, terrace roofs made of reinforced concrete, balconies, water ducts, secret gutters, and retaining and pitch walls, and for pool insulation from outside.

• To protect metallic surfaces (casting, sheet iron, etc.) against corrosion, it can be applied by dipping, brushing, or spraying.

• It is used as an undercoat in all kinds of bituminous membrane applications on metallic surfaces.

 
Advantages

•  It  is ready to use.

•  It  is a cold applied material.

•  It  does not require heating,or thinning.

•  It  dries very fast.

•  It provides a seamless insulation layer.

•  High sulfate resistance.

 
Application

• Emulzer C is applied only onto the side exposed to water (positive insulation). Ready to use, it does not require heating or thinning. It can be applied with a brush, roller, or pistol. To avoid dust and improve durability, non-metallic surfaces can be undercoated with Emilkote.

• Although Emulzer C dries fast-in as little as 2 hours-it is recommended to wait 24 hours before applying a second coat.

• To provide durability against higher pressure, it must be reinforced with materials such as fiber glass, geotextile felt, reinforcing fabric, etc.

• When it is used on the roofs which are continuously exposed to outdoor conditions (except walking), it is recommended to apply ALUTEC over Emulzer C to provide improved aesthetics as well as protection against sunlight.

 
Consumption
500 g/m² for each coat
 
Packaging

17   kg Metallic Case
4,5  kg Metallic Case
200 kg Iron Barrel