Emülzer CSP is a ready-to-use waterproofing bituminous solution with a rubber additive. It does not contain any filling material. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming a waterproof layer.

•    It is used in grounds, piles, and retaining and pitch walls against ground moisture and water leakage.

•    It is used in the terrace roofs made of reinforced concrete, in balconies, and in secret gutters against rainwater.

•    It is used for the insulation of galleries, drainage and sewage channels, and collectors.

•    It is used for the insulation of pools, and service water storage tanks with open top.

•   To protect metallic surfaces (casting, sheet iron, etc.) against corrosion, it can be applied by dipping, brushing, or spraying.

•  It is used as an undercoat in all kinds of bituminous membrane applications on metallic surfaces.

• Emulzer CSP is applied only onto the side exposed to water (positive insulation). As a prepared material, it does not require heating, or thinning.

  • It can be applied with a brush, roller, or pistol.

• To avoid dust and improve durability, non-metallic surfaces can be undercoated with Emilkote.

• Although Emulzer CSP dries fast-in as little as 1 hour-it is recommended to wait 24 hours before applying a second coat.

• To provide durability against higher pressure, it must be reinforced with materials such as glass fibre, felt, reinforcing fabric, etc.

• When it is used on the roofs which are continuously exposed to outdoor conditions (except walking), it is recommended to apply ALUTEC over Emulzer CSP to provide improved aesthetics as well as protection against sunlight.

•       It is ready to use.

•       As a cold applied material, it does not require heating, or thinning.

•       It dries very fast.

•       It provides a seamless insulation layer.

17   kg Metallic Case
4,5  kg Metallic Case
200 kg Iron Barrel