PRODUCTS

Elastokote 1050 - Water-Based Liquid Membrane

Elastokote 1050 - Water-Based Liquid Membrane

Elastokote is a water-based, ready-to-use, single-component liquid membrane with elastomeric additives, and it is used for insulating water and damp. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

Description

Elastokote is a water-based, ready-to-use, single-component liquid membrane with elastomeric additives, and it is used for insulating water and damp. By the evaporation of the water it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer.

 
Usage Areas

• It can be used on all horizontal and vertical surfaces.

• It is used for the insulation of foundations, underground storehouses, and basements.

• It is used for insulating water leakages in closed damp environments such as bathrooms, kitchens, toilets, etc.

• For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with materials such as polyester felt, reinforcing fabric, etc.

• The alum material obtained by mixing Elastokote with sieved fine sand and cement is applied with a trowel to smooth out and level the surface, or to provide a protective coat over insulation.

 
Advantages

•      It can be easily applied by anyone.

•       It provides a seamless insulation layer.

•       As a water-based material it is environment friendly.

•       Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.

•       Because it contains water, it enables good adhesion even when the surface is moist.

•       It provides permanent elasticity.

•       It is ready to use.

•       As a cold applied material, it does not require heating or thinning.

•       It can cover capillary cracks.

 
Application

•       The surface must be undercoated with Emilkote or izola.

•       As a cold applied, prepared material, Elastokote should not be used with thinner.

•       It can be applied with a bitumen brush, or trowel.

•       Depending on weather conditions, it dries in approximately 4-5 hours.

•       It should not be applied in rainy weather, and at temperatures below +5°C.

•       Each coat must be applied only after the preceding one is completely dry.

 
Consumption
2 kg/m² for each coat (with trowel)
 
Ambalajları

23 kg Pail