It is a ready-to-use waterproofing material obtained by mixing water

and bitumen by using special methods. It adheres firmly to the surface

it is applied, forming a waterproof layer.

•       İzola can be used as an undercoat prior to all bituminous membrane applications. Thanks to its superior adherence characteristics, it allows the bituminous membranes under which it is applied to adhere firmly to the surface they are applied, leaving no gap in between.

•       It is used to insulate water leakage on all horizontal and vertical surfaces in closed spaces such as foundations, underground storehouses and basements, and in damp environments such as bathrooms, kitchens and toilets, etc. For the applications requiring durability against higher water pressure, and on cracked surfaces, it must be reinforced with materials such as fiber glass, polyester felt, reinforcing fabric, etc.

•       The alum material obtained by mixing Izola with sieved fine sand and cement is applied with a trowel to smooth out and level the surface, or to provide a protective coat over insulation.

•       In parquet flooring applications with hot bituminous materials, it is applied over the alum as an undercoat.

•       It is applied onto construction molds for easy demolding, and to provide a smooth surface. It prevents concrete curing water from damaging molds.

•    It is very economical.

•    Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.

•    Because it is thinned with water, it adheres perfectly to all kinds of surfaces, even when the surface is moist.

•    By the evaporation of the water it contains, it forms a waterproof and water-insoluble layer.

•     Izola is a cold applied material.

•     After having mixed with water with a ratio of approximately 20%, it is applied with a bitumen brush, roller, or pistol.

•     Depending on weather conditions, it dries in approximately 4-5 hours.

•     It should not be applied in rainy weather, or at temperatures below +5°C.

•     Each coat must be applied only after the preceding one is completely dry.