PRODUCTS
UKS EXPOSED CONCRETE PLASTER PRIMER
It is the acrylic based, one-component plaster coat increasing adherence
of surface before application of cement or gypsum plaster and make them
adhere much better for vertical and horizontal exposed concrete
surfaces.
Product Description
It is the acrylic based, one-component plaster coat increasing adherence of surface before application of cement or gypsum plaster and make them adhere much better for vertical and horizontal exposed concrete surfaces.
Application Areas
It is used in indoors and outdoors as adherence promoter of plaster, cement and lime based mixtures in vertical and horizontal applications.
Wastage
0,2 - 0,35 kgs/m2 (It is varied by applied surfaces.)
Color: White
Water Mixing Rate
Add 5-7 liters water into UKS Exposed Concrete Plaster Coat of 20 kgs and mix them with a low speed mixer until obtaining a homogenous mixture.
Drying Time
About 24 hours under the conditions of 23 °C and relative moisture rate of 50%.
Application Temperature: 5 °C / 30 °C
TECHNICAL DATA
Chemical Structure Special acrylic resin based
Density 1,35 kgs/lt (unreduced)
Application Temperature 5 °C / 30 °C
Water Mixing Rate Ready for use (if it is necessary, 1-2 liters of water is added to original bucket of 20 kgs)
Curing Time 24 hours
Color Pink
Package Bucket of 20 kgs
Storage and Shelf Life 1 year at maximum in a cool and dry place in its covered original package
Storage and Shelf Life
It is 1 year at maximum in a cool and dry place in its covered original package. They should be stored on pallets in their original buckets of 20 kg and in maximum 4 layer stacks.
Surface Preparation
Application surfaces should be dry and clean. It shouldn’t be applied to wet and moist surfaces.
Application
Plaster application is performed 6 hours later than application of UKS Exposed Concrete Plaster Coat. It should be applied by a brush or roller in layers. Undercoated surface should be protected from factors such as water, rain and strong wind until it completes its curing.
Health, Safety and Environment Information
Use personal protective equipments. In case of contact with eyes, wash your eyes with plenty of water and seek medical advice. Keep out of reach of children and covered. Do not eat. Do not throw remaining coat to the washbasin, closet or environment. Do not use empty packages to store food and drinking water.
It is the acrylic based, one-component plaster coat increasing adherence of surface before application of cement or gypsum plaster and make them adhere much better for vertical and horizontal exposed concrete surfaces.
Application Areas
It is used in indoors and outdoors as adherence promoter of plaster, cement and lime based mixtures in vertical and horizontal applications.
Wastage
0,2 - 0,35 kgs/m2 (It is varied by applied surfaces.)
Color: White
Water Mixing Rate
Add 5-7 liters water into UKS Exposed Concrete Plaster Coat of 20 kgs and mix them with a low speed mixer until obtaining a homogenous mixture.
Drying Time
About 24 hours under the conditions of 23 °C and relative moisture rate of 50%.
Application Temperature: 5 °C / 30 °C
TECHNICAL DATA
Chemical Structure Special acrylic resin based
Density 1,35 kgs/lt (unreduced)
Application Temperature 5 °C / 30 °C
Water Mixing Rate Ready for use (if it is necessary, 1-2 liters of water is added to original bucket of 20 kgs)
Curing Time 24 hours
Color Pink
Package Bucket of 20 kgs
Storage and Shelf Life 1 year at maximum in a cool and dry place in its covered original package
Storage and Shelf Life
It is 1 year at maximum in a cool and dry place in its covered original package. They should be stored on pallets in their original buckets of 20 kg and in maximum 4 layer stacks.
Surface Preparation
Application surfaces should be dry and clean. It shouldn’t be applied to wet and moist surfaces.
Application
Plaster application is performed 6 hours later than application of UKS Exposed Concrete Plaster Coat. It should be applied by a brush or roller in layers. Undercoated surface should be protected from factors such as water, rain and strong wind until it completes its curing.
Health, Safety and Environment Information
Use personal protective equipments. In case of contact with eyes, wash your eyes with plenty of water and seek medical advice. Keep out of reach of children and covered. Do not eat. Do not throw remaining coat to the washbasin, closet or environment. Do not use empty packages to store food and drinking water.