PRODUCTS
UKS REPAIR MORTAR Thin - Thick
 |  |
It is the ready-mixed, polymer-modified and cement based repair mortar
with high adherence can be used in repairing and plastering of gross
concrete, prefabricated building elements and in similar repairing and
detection works.
Product Description
It is the ready-mixed, polymer-modified and cement based repair mortar with high adherence can be used in repairing and plastering of gross concrete, prefabricated building elements and in similar repairing and detection works.
Usage Areas
It is used in repairing and plastering of gross concrete surfaces, infilling the hollows arising from settlement errors, infilling and plastering the hollows on surfaces of the concrete prefabricated elements, in all installation and repairing works of the buildings, leveling the slab floor prior to final coating, repairing and plastering of the walls and ceilings, in edge and corner repairs, all vertical and horizontal, high adherence desired installation, repair and plaster works of any reinforced concrete structure.
Advantages of the Product
It is easy to use and resistant to water, frost and exterior weather conditions with an excellent workability. It can be used in horizontal and vertical surfaces, its adherence is high. An extremely smooth surface is obtained, it is polymer-doped and its physical features are quite high.
TECHNICAL DATA
THIN REPAIR MORTAR THICK REPAIR MORTAR
Powder Color Gray Gray
Package Kraft sack of 20 kgs Kraft sack of 20 kgs
Operating Temperature +5 °C / 30 °C surface temperature +5 °C / 30 °C surface temperature
Pot Life Approximately 60 minutes Approximately 60 minutes
Wastage 1,6 kgs / m2 for 1 mms thickness 1,6 kgs / m2 for 1 mms thickness
Storage Shelf life is approximately 6 months. Shelf life is approximately 6 months.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and must be crack-free, dry and clean. The cleaned surface is soaked with a brush or sponge and gets ready for repair application.
Preparation Instructions and Application
Powder building material (20 kgs) is poured into 5 kgs clean and cool mixing water depending on the desired consistency and a homogenous, smooth mixture is obtained with a proper low-speed mixer in 3-4 minutes and waited for 5 minutes. Water shouldn’t be added into the powder material.
Rested material gets ready by re-mixing and applied on the pre-wetted, saturated surface with the help of a spatula or trowel.
Considerations
The prepared material should be used within approximately 1 hour, water and powder cannot be added into the mixture started setting, it is required to protect the application area from direct sunlight, wind, rain and frost for the first 24 hours, application temperature is recommended to be 5 °C - 30 °C, application shouldn’t be made at the temperatures below -5 °C.
It is the ready-mixed, polymer-modified and cement based repair mortar with high adherence can be used in repairing and plastering of gross concrete, prefabricated building elements and in similar repairing and detection works.
Usage Areas
It is used in repairing and plastering of gross concrete surfaces, infilling the hollows arising from settlement errors, infilling and plastering the hollows on surfaces of the concrete prefabricated elements, in all installation and repairing works of the buildings, leveling the slab floor prior to final coating, repairing and plastering of the walls and ceilings, in edge and corner repairs, all vertical and horizontal, high adherence desired installation, repair and plaster works of any reinforced concrete structure.
Advantages of the Product
It is easy to use and resistant to water, frost and exterior weather conditions with an excellent workability. It can be used in horizontal and vertical surfaces, its adherence is high. An extremely smooth surface is obtained, it is polymer-doped and its physical features are quite high.
TECHNICAL DATA
THIN REPAIR MORTAR THICK REPAIR MORTAR
Powder Color Gray Gray
Package Kraft sack of 20 kgs Kraft sack of 20 kgs
Operating Temperature +5 °C / 30 °C surface temperature +5 °C / 30 °C surface temperature
Pot Life Approximately 60 minutes Approximately 60 minutes
Wastage 1,6 kgs / m2 for 1 mms thickness 1,6 kgs / m2 for 1 mms thickness
Storage Shelf life is approximately 6 months. Shelf life is approximately 6 months.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and must be crack-free, dry and clean. The cleaned surface is soaked with a brush or sponge and gets ready for repair application.
Preparation Instructions and Application
Powder building material (20 kgs) is poured into 5 kgs clean and cool mixing water depending on the desired consistency and a homogenous, smooth mixture is obtained with a proper low-speed mixer in 3-4 minutes and waited for 5 minutes. Water shouldn’t be added into the powder material.
Rested material gets ready by re-mixing and applied on the pre-wetted, saturated surface with the help of a spatula or trowel.
Considerations
The prepared material should be used within approximately 1 hour, water and powder cannot be added into the mixture started setting, it is required to protect the application area from direct sunlight, wind, rain and frost for the first 24 hours, application temperature is recommended to be 5 °C - 30 °C, application shouldn’t be made at the temperatures below -5 °C.