PRODUCTS
UKS LEVELLING SCREED SL 200
 |
It is the self-leveling, high-performance, mineral-doped, special cement-based and polymer modified leveling screed.
Product Description
It is the self-leveling, high-performance, mineral-doped, special cement-based and polymer modified leveling screed.
Usage Areas
It is used under the ceramic, granite, marble, wood flooring, laminate flooring, carpet, PVC, linoleum, rubber coatings and in flattening the various floors which are not at desired level.
Advantages of the Product
It shows a high stability, it is easily applicable at any thickness, is spread by itself, can be applied with a pump. It is resistant to load of a wheelchair, suitable for floor heating places and provides an economic use.
TECHNICAL DATA
Powder Colour Grey
Operating Time Surface temperature is minimum of 5 °C
Application Time 15-25 minutes
Opening to Traffic 12-18 hours
Preparation for coating 24-48 hours
Application Tools Proper trowel and spiked roller
Wastage Varies depending on surface conditions. 1.5 kgs /m2 is required for each 1mm thickness.
Storage Shelf life is about 6 months. Products should be stored in a cool and dry place and in maximum 6 layer stacks.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and must be crack-free, dry and clean.
Using a UKS liner proper for the floor is strictly recommended prior to the application of the leveling screed.
Preparation Instructions and Application
Powder building material (20 kgs) is poured into 5-6 liters of clean and cool mixing water and a homogenous, smooth mixture is obtained with a proper low-speed mixer in 3-4 minutes. Water shouldn’t be added into the powder material. Application temperature is recommended to be at +5 °C - +35 °C. Spread the prepared screed with a trowel according to the desired thickness. 0-4 mms of quartz sand is added with the 30% to 50% ratio by weight for the applications thicker than 5 mms.
Considerations
The surface should be strictly purified from the adherence reducing materials and an appropriate liner should be used. Prepare the applicable amount of material for every time due to the leveling screed hardens early. Hardened mortar should not be watered again. Protect the newly- applied area from high heat, UV lights and draught. It is recommended to use a spiked roller for the evacuation of air bubbles.
It is the self-leveling, high-performance, mineral-doped, special cement-based and polymer modified leveling screed.
Usage Areas
It is used under the ceramic, granite, marble, wood flooring, laminate flooring, carpet, PVC, linoleum, rubber coatings and in flattening the various floors which are not at desired level.
Advantages of the Product
It shows a high stability, it is easily applicable at any thickness, is spread by itself, can be applied with a pump. It is resistant to load of a wheelchair, suitable for floor heating places and provides an economic use.
TECHNICAL DATA
Powder Colour Grey
Operating Time Surface temperature is minimum of 5 °C
Application Time 15-25 minutes
Opening to Traffic 12-18 hours
Preparation for coating 24-48 hours
Application Tools Proper trowel and spiked roller
Wastage Varies depending on surface conditions. 1.5 kgs /m2 is required for each 1mm thickness.
Storage Shelf life is about 6 months. Products should be stored in a cool and dry place and in maximum 6 layer stacks.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and must be crack-free, dry and clean.
Using a UKS liner proper for the floor is strictly recommended prior to the application of the leveling screed.
Preparation Instructions and Application
Powder building material (20 kgs) is poured into 5-6 liters of clean and cool mixing water and a homogenous, smooth mixture is obtained with a proper low-speed mixer in 3-4 minutes. Water shouldn’t be added into the powder material. Application temperature is recommended to be at +5 °C - +35 °C. Spread the prepared screed with a trowel according to the desired thickness. 0-4 mms of quartz sand is added with the 30% to 50% ratio by weight for the applications thicker than 5 mms.
Considerations
The surface should be strictly purified from the adherence reducing materials and an appropriate liner should be used. Prepare the applicable amount of material for every time due to the leveling screed hardens early. Hardened mortar should not be watered again. Protect the newly- applied area from high heat, UV lights and draught. It is recommended to use a spiked roller for the evacuation of air bubbles.