PRODUCTS
UKS GAS CONCRETE ADHESIVE
 |
It is a cement based adhesive with high mechanical strength and single
component, containing chemical additives to increase the product
performance.
Product Description
It is a cement based adhesive with high mechanical strength and single component, containing chemical additives to increase the product performance.
Usage Areas
It is used for adhesion of gas concretes, pressed bricks and pumice blocks produced in different sizes.
Product Advantages
Easy to prepare and apply, provides the appropriate working times, does not slide in vertical applications, it has high adhesion property, water and frost resistant, does not effected by differences in temperature.
TECHNICAL DATA
Powder Color Gray and White
Surface Temperature 5 °C / 35 °C
Open Time 15-20 minutes
Pot Life Approximately 1 hour
Application Tool A notched trowel appropriate for the size of the covering
Wastage 3-4 kgs / m2
Storage Shelf life is about 12 months. Products should be stored in a cool and dry place and in maximum 6 layer stacks.
Surface Preparation
The application floor should be cleared of loose parts, oil and other chemicals and must be clean. Concrete, cement, plasters should be dry and must be completed the setting time. If the floor is extremely absorbent or the application is made in hot weathers, hydration should be made.
Preparation Instructions and Application
25 kgs powder building material is poured into the 6-7 liters (may vary depending on air temperature) of clean and cool mixture water and the lump-free homogenous mixture is provided with an appropriate low-speed mixer in 3-4 minutes and waited for 5-10 minutes.
Rested material gets ready for use by re-mixing. The prepared grout must be used within 2 hours.
The expired or shelling grouts cannot be used .grout should be applied at the specified temperature and should be kept away from direct sun, wind and frost.
Considerations
Never use the expired or shelling grouts. Hardened grout should not be watered again.
Applications must be kept away from rain, frost, wind, sunlight and high temperature for the first 24 hours.
It is a cement based adhesive with high mechanical strength and single component, containing chemical additives to increase the product performance.
Usage Areas
It is used for adhesion of gas concretes, pressed bricks and pumice blocks produced in different sizes.
Product Advantages
Easy to prepare and apply, provides the appropriate working times, does not slide in vertical applications, it has high adhesion property, water and frost resistant, does not effected by differences in temperature.
TECHNICAL DATA
Powder Color Gray and White
Surface Temperature 5 °C / 35 °C
Open Time 15-20 minutes
Pot Life Approximately 1 hour
Application Tool A notched trowel appropriate for the size of the covering
Wastage 3-4 kgs / m2
Storage Shelf life is about 12 months. Products should be stored in a cool and dry place and in maximum 6 layer stacks.
Surface Preparation
The application floor should be cleared of loose parts, oil and other chemicals and must be clean. Concrete, cement, plasters should be dry and must be completed the setting time. If the floor is extremely absorbent or the application is made in hot weathers, hydration should be made.
Preparation Instructions and Application
25 kgs powder building material is poured into the 6-7 liters (may vary depending on air temperature) of clean and cool mixture water and the lump-free homogenous mixture is provided with an appropriate low-speed mixer in 3-4 minutes and waited for 5-10 minutes.
Rested material gets ready for use by re-mixing. The prepared grout must be used within 2 hours.
The expired or shelling grouts cannot be used .grout should be applied at the specified temperature and should be kept away from direct sun, wind and frost.
Considerations
Never use the expired or shelling grouts. Hardened grout should not be watered again.
Applications must be kept away from rain, frost, wind, sunlight and high temperature for the first 24 hours.