PRODUCTS
UKS DECORATIVE PLASTER – Grain Size (0,5 - 2,0 mm)
 |
It is the mineral textured, super white decorative coating concrete
grout which is white cement and polymer-modified doped and showing high
resistant for last coat and applied with trowel.
Product Description
It is the mineral textured, super white decorative coating concrete grout which is white cement and polymer-modified doped and showing high resistant for last coat and applied with trowel.
Usage Areas
It is used on exterior and interior plasters as the last cot decorative coating in thermal sheathing systems.
Advantages of the Product
It is easy to use, provides excellent adhesion, providing a homogeneous application it has a decorative look. The wavy appearance of thermal insulation system applications can be repaired. It is resistant against water and frost. Being resistant to external effects it preserves the structure for many years. The exterior wall paints can be applied on.
TECHNICAL DATA
Powder Color White
Water Mixing Ratio 6-6,5 lt. water / 25 kgs powder
Resting Time 2-3 minutes
Pot Life Approximately 1 to 1,5 hours
Operating Temperature Between +5 °C and +35 °C
Wastage Approximately 3-3,5 kgs
Surface Preparation
Application surfaces must be cleaned of the anti-stick agents such as dust, oil. Before application, UKS Decorative Plaster Primer is applied on the surface with a brush or roller..
Preparation and Implementation of the Concrete Grout
25 kgs of UKS Decorative Plaster is mixed by adding into approximately 6-6,5 liters of clean water preferably with a low-speed mixer or trowel until no lump remains. The prepared grout is rested for 4-5 minutes. Mixing the rested grout again, it is get ready for use. The prepared grout should be consumed within 1-1.5 hours.
Application Information
Building material should be applied to the surface with a steel trowel and should be spread over the surface at the same thickness. Application thickness should be adjusted according to the thickness of the largest aggregate. You should design on plaster by making circular motions with a plastic trowel at least 10 minutes when the material is still wet. If the temperature is high after application is completed moisten the surface until the completion of cement setting.
Considerations
Avoid from application on temperatures below 5 °C and 35 °C. If it is possible please do apply without interruption, if it is necessary, apply separately by dividing the surface to areas of about 20 m2. Starting the plastic trowel application within at latest 10 minutes, do not allow the formation of a film layer on the plaster. Avoid application at frozen, sun-soaked and windswept areas or areas with the risk of frost within 24 hours. After the application, make sure that there won’t be snow or severe cold until the completion of cement setting (About 1 week). Do not add water and powder nowise into the expired concrete grout for using. Product should not be applied on the windswept horizontal surfaces. Package can be stored for 6 months on the pallet within 25 kgs of kraft sacks on dry conditions of shelf life and can be stacked 10 pieces over and over with their unopened packages.
It is the mineral textured, super white decorative coating concrete grout which is white cement and polymer-modified doped and showing high resistant for last coat and applied with trowel.
Usage Areas
It is used on exterior and interior plasters as the last cot decorative coating in thermal sheathing systems.
Advantages of the Product
It is easy to use, provides excellent adhesion, providing a homogeneous application it has a decorative look. The wavy appearance of thermal insulation system applications can be repaired. It is resistant against water and frost. Being resistant to external effects it preserves the structure for many years. The exterior wall paints can be applied on.
TECHNICAL DATA
Powder Color White
Water Mixing Ratio 6-6,5 lt. water / 25 kgs powder
Resting Time 2-3 minutes
Pot Life Approximately 1 to 1,5 hours
Operating Temperature Between +5 °C and +35 °C
Wastage Approximately 3-3,5 kgs
Surface Preparation
Application surfaces must be cleaned of the anti-stick agents such as dust, oil. Before application, UKS Decorative Plaster Primer is applied on the surface with a brush or roller..
Preparation and Implementation of the Concrete Grout
25 kgs of UKS Decorative Plaster is mixed by adding into approximately 6-6,5 liters of clean water preferably with a low-speed mixer or trowel until no lump remains. The prepared grout is rested for 4-5 minutes. Mixing the rested grout again, it is get ready for use. The prepared grout should be consumed within 1-1.5 hours.
Application Information
Building material should be applied to the surface with a steel trowel and should be spread over the surface at the same thickness. Application thickness should be adjusted according to the thickness of the largest aggregate. You should design on plaster by making circular motions with a plastic trowel at least 10 minutes when the material is still wet. If the temperature is high after application is completed moisten the surface until the completion of cement setting.
Considerations
Avoid from application on temperatures below 5 °C and 35 °C. If it is possible please do apply without interruption, if it is necessary, apply separately by dividing the surface to areas of about 20 m2. Starting the plastic trowel application within at latest 10 minutes, do not allow the formation of a film layer on the plaster. Avoid application at frozen, sun-soaked and windswept areas or areas with the risk of frost within 24 hours. After the application, make sure that there won’t be snow or severe cold until the completion of cement setting (About 1 week). Do not add water and powder nowise into the expired concrete grout for using. Product should not be applied on the windswept horizontal surfaces. Package can be stored for 6 months on the pallet within 25 kgs of kraft sacks on dry conditions of shelf life and can be stacked 10 pieces over and over with their unopened packages.