PRODUCTS
UKS TITANIUM SERIES (-10 °C) VIADUCT APP DOPED PLASTOMERIC WATER ISOLATION MEMBRANE
It is the APP (Atactic Polypropylene) doped water isolation membrane with polyester felt; both sides are coated on with polyethylene film.
Product Description
It is the APP (Atactic Polypropylene) doped water isolation membrane with polyester felt; both sides are coated on with polyethylene film .
Usage Areas
It is used as water isolation membrane in bridges and viaducts.
Advantages of the Product
It is flexible, long-lasting, resistant to the aggressive effects that may occur in the soil, can easily be applied to different types of surfaces and can easily be applied to the details such as dilation, edges of chimney and parapet returns, it has high tensile and breakage stability.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and surface defects are repaired with the UKS Repair Mortar. It is recommended to use the UKS Bitumen Emulsion as a liner on the application surface for a healthfully application.
Application
It is fully adhered to the surfaces with blowpipe flame leaving 10 cm of margin at jointing parts and 15 cm of margin at roll finishing parts.
Storage and Considerations
Rolls must absolutely be stored perpendicularly; rolls should be protected from direct UV and sudden temperature changes, the piercing and cutting operations should not be done after application, used terraces should be protect with floor covering.
It is the APP (Atactic Polypropylene) doped water isolation membrane with polyester felt; both sides are coated on with polyethylene film .
Usage Areas
It is used as water isolation membrane in bridges and viaducts.
Advantages of the Product
It is flexible, long-lasting, resistant to the aggressive effects that may occur in the soil, can easily be applied to different types of surfaces and can easily be applied to the details such as dilation, edges of chimney and parapet returns, it has high tensile and breakage stability.
Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and surface defects are repaired with the UKS Repair Mortar. It is recommended to use the UKS Bitumen Emulsion as a liner on the application surface for a healthfully application.
Application
It is fully adhered to the surfaces with blowpipe flame leaving 10 cm of margin at jointing parts and 15 cm of margin at roll finishing parts.
Storage and Considerations
Rolls must absolutely be stored perpendicularly; rolls should be protected from direct UV and sudden temperature changes, the piercing and cutting operations should not be done after application, used terraces should be protect with floor covering.
| TECHNICAL FEATURES | METRIC UNIT | STANDARD | PP 4000 |
| Bearing (Fiberglass and polyester felt) | gr/m2 | TS 11758-1 | Polyester Felt |
| Thickness ± 0.2 | mm | TS EN 1849-1 | 4.0 |
| Temperature Resistance | C | TS 11758-1 | >120 |
| Cold Bending (Maximum) | C | TS EN 1109 | -10 |
| Tensile Strength (Height/ Width) | N/5 cm | TS 1908 | 1000/800 |
| Elongation at Break (Height/ Width) | % | TS 1908 | 2/2 |
| Top Surface Coating - PE Foil | - | TS 11758-1 | Pe |
| Sub Surface Coating - PE Foil | - | TS 11758-1 | Pe |
| Roll Sizes | m x m | TS 11758-1 | 1 X 15 |