PRODUCTS

UKS TITANIUM SERIES (-10 °C) GREEN APP DOPED PLASTOMERIC WATER ISOLATION MEMBRANE

UKS TITANIUM SERIES (-10 °C) GREEN APP DOPED PLASTOMERIC WATER ISOLATION MEMBRANE
It is the APP (Atactic Polypropylene) doped water isolation membrane with polyester felt; both sides are coated on with polyethylene film .
Product Description
It is the APP (Atactic Polypropylene) doped water isolation membrane with polyester felt; both sides are coated on with polyethylene film .

Usage Areas
It is used in the contact points such as gardens and terrace roofs of buildings with soil.

Advantages of the Product
It is flexible, long-lasting, resistant to the aggressive effects that may occur in the soil, can easily be applied to different types of surfaces and can easily be applied to the details such as dilation, edges of chimney and parapet returns, it has high tensile and breakage stability.

Surface Preparation
Application ground should be purified from loose pieces, oil and other chemicals and surface defects are repaired with the UKS Repair Mortar. It is recommended to use the UKS Bitumen Emulsion as a liner on the application surface for a healthfully application.

Application
It is fully adhered to the surfaces with blowpipe flame leaving 10 cm of margin at jointing parts and 15 cm of margin at roll finishing parts.

Storage and Considerations
Rolls must absolutely be stored perpendicularly; rolls should be protected from direct UV and sudden temperature changes, the piercing and cutting operations should not be done after application, used terraces should be protect with floor covering.

TECHNICAL FEATURES METRIC UNIT STANDARD PP 3000 PP 4000
Bearing (Fiberglass and polyester felt) gr/m2 TS 11758-1 Polyester felt Polyester felt
Thickness ± 0.2 mm TS EN 1849-1 3.0 3.0
Temperature Resistance C TS 11758-1 >120 >120
Cold Bending (Maximum) C TS EN 1109 -10 -10
Tensile Strength (Height/ Width) N/5 cm TS 1908 1000/800 1000/800
Elongation at Break (Height/ Width) % TS 1908 2/2 2/2
Top Surface Coating - PE Foil - TS 11758-1 Pe Pe
Sub Surface Coating - PE Foil - TS 11758-1 Pe Pe
Roll Sizes m x m TS 11758-1 1 X 10 1 X 10